Autoplot Interface: Difference between revisions

Revision as of 16:45, 14 May 2018

SPEDAS supports sending tplot variables to Autoplot using the command tplot2ap.

Getting Started

For this feature to work, you'll need to open Autoplot and enable the 'Server' feature via the 'Options' menu with the default port (12345). Depending on your firewall settings, you may also need to allow Autoplot to listen for TCP/IP connections on this port.

SPEDAS to Autoplot

To send tplot data to Autoplot, simply use the tplot2ap command as you would use the tplot command, e.g.

<syntaxhighlight lang="idl"> IDL> kyoto_load_ae, trange=['2015-12-15', '2015-12-16'] IDL> tplot2ap, 'kyoto_ae' </syntaxhighlight>

Autoplot to SPEDAS

Support is being added for retrieving data from Autoplot windows via the ap2tplot command; check back for updates soon!

More Examples

You can find more examples of using tplot2ap in the SPEDAS distribution at:

   projects/mms/examples/advanced/mms_tplot2autoplot_crib.pro
   projects/themis/examples/advanced/thm_crib_tplot2autoplot.pro

Revision as of 16:44, 14 May 2018 (view source) Egrimes (talk \| contribs) No edit summary ← Older edit		Revision as of 16:45, 14 May 2018 (view source) Egrimes (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	SPEDAS supports ~~sending~~ sending tplot variables to Autoplot using the command tplot2ap.		SPEDAS supports sending tplot variables to Autoplot using the command tplot2ap.

	== Getting Started ==		== Getting Started ==