THEMIS Particle Moments (Ground)

From SPEDAS Wiki
Revision as of 22:09, 21 May 2015 by Floresaa (talk | contribs)
Jump to navigation Jump to search
Density, velocity, and temperature for ESA electrons.

Moments of the particle distribution may be calculated manually. This allows for manual calibration and specification of input parameters. Moments may be produced after selecting a spacecraft, particle data type, and time range. Some products also require magnetic field data to be present.

For command line usage see:

/projects/THEMIS/examples/basic/thm_crib_part_products.pro


For spacecraft processed moments see on-board moments.


Overview

Particle moments are produced by thm_part_products from raw particle data. All data products are calculated simultaneously for a particular data type.

SPEDAS> thm_part_products, probe='a', datatype='peif', trange=[t0,t1], outputs = 'moments'

Support data will be used automatically if it is present. By default the software will use "th?_fgs" as the magnetic field and "th?_pxxm_pot" as the spacecraft potential ("?" denoting probe designation). If no support data is found it will be ignored; any derived quantities will not be calculated. Keywords may be used to specify support data:

SPEDAS> thm_part_products, probe='a', datatype='peif', trange=[t0,t1], outputs = 'moments', mag_name='tha_fgl', sc_pot_name='tha_peef_sc_pot'

Data Products

Products marked with a * require magnetic field data to be loaded.

All "vector" data types are 3-vectors. Symmetric tensors are stored in six dimensions: xx, yy, zz, xy, xz, yz.

Variable Name Description Units Data type
density Density 1/cm3 scalar
current Current scalar
flux Number flux 1/(s·cm2) vector
eflux Energy flux eV/(s·cm2) vector
velocity Velocity km/s vector
t3 Diagonalized temperature eV vector
magt3 Magnetic field aligned temperature* eV vector
avgtemp Average temperature eV scalar
vthermal Thermal velocity km/s vector
mftens Momentum flux tensor eV/cm3 symmetric tensor
ptens Pressure tensor eV/cm3 symmetric tensor
symm Direction of pressure tensor symmetry n/a vector
symm_phi Phi (longitude) direction of symmetry vector ° scalar
symm_theta Theta (latitude) direction of symmetry vector ° scalar
symm_ang Angle between symmetry vector and magnetic field* ° scalar


Contamination

Spacecraft potential

Spacecraft potential plotted with corrected and uncorrected ESA density data

Increased spacecraft potential may affect the lower energy bins for ESA data. A tplot variable containing spacecraft potential can be specified when generating particle data products. If no variable is specified then "th?_pxxm_pot" will be used, if present. Spacecraft potential must be loaded separately:

SPEDAS> thm_load_mom, probe='a', trange=[t0,t1]

SPEDAS> thm_part_products, probe='a', datatype='peef', trange=[t0,t1], output='moments', sc_pot_name='tha_pxxm_pot'

ESA background subtraction

Background subtraction for ESA data is enabled by default when producing spectra. For background removal options see ESA Background Removal. For example usage see:

/projects/THEMIS/examples/advanced/thm_crib_esa_bgnd_remove.pro

SST contamination

In most cases, contaminated SST bins should be masked and interpolated over automatically. If the default set of bins is inadequate then a list may be specified instead. For more information see SST Contamination Removal.

SPEDAS> thm_part_products, probe='a', datatype='psif', trange=[t0,t1], sst_sun_bins=[0,8,16,24,32,33,34,40,47,48,49,50,55,56,57]


Uncertainty estimates

Resources

ESA instrument page

SST instrument page